首页 > 供应信息列表 > 铸钢丸S280
like 收藏该现货信息        浏览量:2642

铸钢丸S280 信息失效或已下架

厂家: 邹平鑫源金属磨料有限公司 v  

钢丸 规格清单 库存量 单价 单价说明
0.8
80.00吨
¥3800.00/每吨
出厂含税价-不含运费
0
cart


*注:买方和卖方站内交易聊天内容可作为法律依据,请全程使用平台内部交易聊天咨询等操作,请勿使用平台以外的聊天工具或电话私下交易,防止上当受骗! 支付技术服务由蚂蚁金服提供,资金由银行监管,票款一致、安全便捷。
支持的交易模式 1:不支持线上交易
支持的交货期 3天内  
支持的尾款账期 3天内  
包装类型 袋装包装/小袋包装
产品有效期 2019-07-15至2019-08-14
仓库所在地 山东省

产品详情文字说明


1、钢丸、钢砂的用途

Applications Steel Shots and Steel Grit

   SS-2.5   SG-2.5   大型铸铁   铸钢件  钢结构件                 SS-2.0   SG-2.0   大型锻件   热处理件的清砂  除锈去                                     除氧化皮表面清理等                          Grit and rusts removing of large-sized cast iron,cast   steel,steel structures,large sized forging and surface   treatment of oxidized workpieces

   SS-1.7   SG-1.7   大型  中型铸件的清砂  锻造件  热处     SS-1.4   SG-1.4   理件的去除氧化皮  钢板  型钢及钢                      SG-1.2    构件的除锈及表面强化

 Grit-removing of large and medium sized sastings. Deox-  idization of forgings and heat-treated workpieces, Rust-removing and surface intensifcation of steel plates,scctions and steel structures.


   SS-1.2   SG-1.2   中小型铸造件的清砂   锻件   热处理     SS-1.0   SG-1.0  件  钢板  钢管  型钢及结构钢件的除                                锈强化  涂镀前的表面处理  石材切割    Gntremoving of small and medium sized castings, Rustremoving and intensification of forgings,heat- treated picces, steel plates,steel pipes,sections and steel structures,surface treatment  before plating,cutting of rocks.


   SS-0.8   SG-1.0   小型铸件  锻件  热处理件  铝铜合金     SS-0.6   SG-0.7   铸件  钢板  带钢  钢管等落砂去除氧                                  化皮   弹簧   石材切割  链条的表面                                     强化  研磨加工 

Grit-removing and deoxidization of small-sized castings,forgings.heat-treated pieces,aluminum- copper alloy casting,steel plates steel pipes, scctions and steel structures,surface intensification of springs and chains,cutting of rocks,grinding processing.             

    SS-0.5   SG-0.4   合金铸件  薄板   带钢   小型不锈钢      SS-0.3   SG-0.3    精铸件的清砂 除锈  弹簧强化   喷                                      涂前的表面处理   提高粗糙度   增                                       强附着力                                      Grit-emoving and rust-cleaning of lly castins, thin plates,strip steland small-ized stainless steel castings,intesification of springs surface treatment before plating,improving roughness enhancing adhesiveness.

2、硬 度Hardness

   SS钢丸                    HRC40-50       落砂,去除氧化皮

   SS Steel Shots                          Grit-removing,Decaling

   GP钢砂                  HRC42-50         落砂,去除氧化皮

   GP Steel Grit                             Grit-removing,Decaling

   SS钢砂                 HRC56-60       去除氧化皮,提高粗                                                     糙度,钢板的涂层前处理

   GL Steel Grit                            Decaling;Improving                                                            roughnessl;  surface                                                            treatment beforeplating


3、五大元素技术指标

碳(C)  0.85-1.20

锰(Mn)  0.60-1.20

硅(Si)  0.40-1.20

硫(S)  ≤0.05

磷(P)  ≤0.05

硬度与清理速度成正比,但与寿命成反比。所以硬度高、清理速度快,但寿命短消耗量大,故硬度应适中(约HRC40-50为宜)以产生最经济

之效果。

适中的硬度,具有优良的反弹性,则于喷抛中每一隅角皆能充分清理,

减少处理时间。

抛射材内部缺陷如气孔龟裂,内缩孔等皆可影响其寿命而增加消耗量。

密度大于7.4g/cm3则内部缺陷当越于最小

   Strength is in direct proportion to cleaning speed while it is ininverse proportion to durability,so the products with high strength andquick cleaning speed have a short durability.The optimum choice isproduct with moderate strength(about HRC40-50).

   Products with moderate strength and excellent elasticity canthoroughly clean up every parts of the processing units and reduce theprocessing time, Iteror flaws such as air bells will afet the durbiliythus resulting in greater consumption.

  When the density is more than 7.4/cm3,the products have the leastinterion flaws.



4、严密的品质管理,材质均匀

    SS钢丸、SS钢砂每- -个生产过程皆经过严密的品质管理,材质均匀,可使表面处理工作之进行标准化。

    Strict quality control and first rate products.

   Strict quality control goes with every process of           manufact-ure of SS steel

   shots and SG steel grits. Our products can                     modernize your surface processing  work.


*抛射材料应具备的条件 Necessary Requirements for                                               theprojectile.

1.清理速度快                 Speediness in cleaning

2.品质均匀                      Evemness in quality

3.消耗量少                     Lowness in consumption


*抛射材料选择标准   ion stamdards for the

                                        projectile.

1.适当的硬度             Appropriate hardness

2.足够的密度             Adequate density       

3.适当的金相组织    Suitable metallographical                                                     stucture 








产品详情

留言区

留言板

还没有内容,赶快发言吧……